2013 CAT 140M2 AWD for sale in Norfolk, NE

Machine ran and operated properly with only a couple of areas that need attention.| Motor Graders SMU/Hrs 3611 | Motor Graders Configuration Slipclutch Yes Lift Group Yes All Wheel Drive Yes Diff Lock/Unlock Yes Variable Horsepower Yes Tip Control Yes Side Shift Yes Air Conditioner Yes EROPS Yes | General Appearance Notes Right front fender is gone and left front is broken off at mount base. Cleaning Required Yes   Comments: Machine needs some minor cleaning. S.O.S. Taken No Sheet Metal Good Paint Fair   Comments: Paint has some scratches and chips. Grab Irons Good Steps / Ladder Good Cab or Canopy Good Pre-Cleaner Bowl Good Bumper Good Rear Frame Good Front Frame Good Draw Bar Good Crankcase Guard / Battery Box Good Fuel Tank Good Eng. Enclose Hood / Stack Good Radiator Grill & Shroud Fair   Comments: Right upper corner of fiberglass grill is cracked. | Safety Items Horn Good ROPS Yes Signal Lights Yes Rotating Beacon Yes | Gauges / Operator Station / Console Back Up Alarm Yes Seat Belt Yes Current O&MM Yes Current Safety Manual Yes Air Conditioner Good Glass / Mirrors Fair   Comments: Left cab door glass is cracked. Door Latches Good EMS Panel / Warnings Good Seat Cushion / Arm Rest Good Heater Good Switches Good Gauges Good Dash Console Good | Engine Notes Engine was just completely rebuilt. Belts / Pulleys Good Exhaust / Muffler Good Air Cleaners Good Smoke (B/D/L/W) Normal Oil Pressure (H/L/N) Normal Anti-Freeze Color Red Fluid Levels OK? Yes Water in Oil No Knocking No Blow By No Oil Leaks No | Cooling System Leaks No Hoses Good Radiator Good | Electrical / Starting and Charging System Block Heater Yes Ether Aid Yes Lighting Good Wiring Good Alternator Good Starter Good Batteries / Cables Good | Transmission Notes Transmission seemed to shift and operate properly. Leaks No Transmission - Noisy No Transmission - Forward Shifts Good Transmission - Reverse Shifts Good Lines / Fittings Good Seals Good Controls Good Case Good Transmission - Type Good   Comments: Powertshift Auto | Steering Supplemental Steer Good Wheel Lean Cylinder Good Oil Lines Good Steering Cylinder Good Tie Rods / Rod Ends Good Steering Linkage Good | Brakes Holding What Gear? 2nd Leaks No Parking Brake Good Accumulators Good Lines Good | Tandems Differential Good Wheel Lugs & Rims Good Tandems Good | Hydraulics Leaks No Circle, Shoes & Plates Good Wheel Lean Cylinder Good Tip Cylinder Good Life Cylinder Good Side Shift Cylinder Good Linkage Good Hose Lines Good Pumps & Valves Good Tank Good Operating Condition Good | Blade Blade Size 14' 2' Left extension. Circle Yes Cutting Edge Condition Yes Face / Moldboard Yes | Tires Tire Size 17.5R25 Left-Rear - Side Cuts Section No Left-Rear - Tread Cuts/Chunks Yes Left-Rear - Recapped No Left-Rear - Tread Depth in 1/32in 18/32 Left-Rear - Make/Serial# Bridgestone Left-Rear-Center - Side Cuts Section No Left-Rear-Center - Tread Cuts/Chunks No Left-Rear-Center - Recapped No Left-Rear-Center - Tread Depth in 1/32in 20/32 Left-Rear-Center - Make/Serial# Bridgestone Left-Front - Side Cuts Section No Left-Front - Tread Cuts/Chunks No Left-Front - Recapped No Left-Front - Tread Depth in 1/32in 21/32 Left-Front - Make/Serial# Bridgestone Right-Rear - Side Cuts Section No Right-Rear - Tread Cuts/Chunks No Right-Rear - Recapped No Right-Rear - Tread Depth in 1/32in 20/32 Right-Rear - Make/Serial# Bridgestone Right-Rear-Center - Side Cuts Section No Right-Rear-Center - Tread Cuts/Chunks Yes Right-Rear-Center - Recapped No Right-Rear-Center- Tread Depth in 1/32in 20/32 Right-Rear-Center- Make/Serial# Bridgestone Right-Front - Side Cuts Section No Right-Front - Tread Cuts/Chunks No Right-Front - Recapped No Right-Front - Tread Depth in 1/32in 21/32 Right-Front - Make/Serial# Bridgestone


Demag AC160-2 -

Demag AC160-2 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 210' with quick disconnect system, 30'-56' swing-away jib, - Main boom 210' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension (2x26') - 5 axle crane carrier - Drive & Steer 10x8x8 - 5 sheave block - 1 sheave block - quick disconnect for outriggers - CWT 119,500LB - dolly preparation - air conditioning - rooster sheave + 2nd boom head ...

Demag AC200-1 -

Demag AC200-1 -

Syracuse, NY
Posted on: October 19
Additional Information COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks - Worldwide Engine - 41'-223' Boom - 30'-56' Jib - Single Line Hook - 3 blocks - Telescopic boom HA: 41-223' (12,5m- 67,8m) - rooster sheave - HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree 1-sheaved head, Incl. transport storage - VA16: 8m/16m...

Demag AC250-1 -

Demag AC250-1 -

Syracuse, NY
Posted on: October 19
Additional Information 48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension, - 48'-262' Main Boom - 32'-65' Hydraulic offsettable Jib - 26'-52' Telescopic boom extension - 213,000 lbs of counterweight -125ton-5 sheave hook block - 80 ton- 3 sheave hook block - single line hook - Dolly Preparation, with automatic rigging system - Innovative Demag IC-1 crane con...

Demag AC350-6 -

Demag AC350-6 -

Syracuse, NY
Posted on: October 19
Additional Information 210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system. CRANE CARRIER: - 210' 6 section Main Boom - Drive/Steering 12 x 8 x 10 - automated rear axle steering system - 4 telescopic outriggers with automatic leveling - Automatic centralized lubrication - 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine - ZF AS-Tronic incl...

Demag AC40-1 -

Demag AC40-1 -

Syracuse, NY
Posted on: October 19
Additional Information 3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102' - 3-axle CITY CRANE - Drive & Steer 6x4x6 - Main boom 102' - Boom head traverse cpl.: Searcher hook, incl.shackle and hook - HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7 - Counterweight rigging device - Cast counterweight 3-pieces - Hook bl...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!